This Kinkilin has EXP/CV control jacks for delay time, feedback, noise, rate, modulation amount and mix, the extra toggles are to assign both the dry and delay voice to the mix cv. In the video demo of it, the ehx 8 steps is feeding a bandwidth that is controlling the feedback and the delay time, while a broadcast is into the mix cv jack. All the cv inputs are independent so you can use only one at a given time, 2 or 3, all of them or none.
This is a custom version of the Broadcast, there are 3 independent channels, with the option that the output is the internal LFO or external CV input or expression pedal. Outs 1 and 2 have footswitches, while the the out 3 has a toggle to assign the desired output. The rate / tap ratios can be synced and controlled manually via the expression / cv in (has a toggle to disable this option), also the range of the out 1 can be controlled via the exp / cv in. CV out in case you need more outs.
This is a custom 5 channel Bandwidth CV/Expression splitter, each out is a 0-5v CV output signal, it has 2 inputs 1/4 sources (CV in and CV aux) that are routed into each out via the little toggles (you can distribute as you want), the knobs allows control over the amount of sweep that will be going into the output (and the led will show the movement for a visual help), so you can sync multiple parameters movement from just one source. There is an extra toggle that bypasses the CV aux and enable the knob on the side for the tabletop enthusiast that also like to sweep manually in certain spots. For example if you have a sine wave going from 0 to 5v, you can fine tune one out to go from 2v to 3v sweep, while other is is just moving from 1v to 2v and all synced to the original sweep (so no longer you need to be ultra precise to manipulate those sweet spots).
I got a request to built a broadcast with the option of being able to sync the tap tempo part of the lfo with an external click instead of taping a switch. There’s a jack on tap where a cable is plugged with the click or a metronome, and when the pedal is in tap mode it will sync (and re-sync so it will stay with the beat), when nothing is plugged in the jack there’s a tap switch available. Other stuff was the invert toggle switch, it changes the sweep direction (so when the wave was up it will be down and vice versa), Exp/CV IN for manual sweep and control of the rate/tap ratios and also the range. CV out to expand via the broadband and bandwidth for more options.
This was an used gyroscope that was updated to instead of have the expression jack to control the speed or tap ratios, it will provide a CV (control voltage) of the internal tap tempo LFO, an additional knob was added to control the amount range of the CV out, also a toggle switch to fine tune the amount in the early range and another toggle to change the sweep. Here’s a quick video of it in action, the signal is a vco (which the cv is synced to change its frequency) going into the gyroscope.
This is a custom Copilot Fx Broadcast with 3 independent outputs, this unit allows the user to control in real time 3 expression jacks inputs, giving the control and flexibility to shape the amount of sweep to your liking. The user requested a blank pink case (no artwork / silk screen). It has 3 independent expression outputs, each out has the option to be modulated via the internal LFO (each one has range and aux controls to give you the option to mold the amount of sweep to your preference) or manually (by the source at the cv/exp in jack it could be an expression pedal or cv source; with nothing plugged in the jack , it will be like an expression pedal in the toe down position), so you can have an LFO at the out 1 and 2, while output 3 is controlled via an expression pedal.
Outputs 1 and 2 have footswitches to allow real time control while the 3rd output is via a toggle switch. Also the speed of the LFO or the tap multiplier rates can be controlled via the expression / cv input, and the range / amount of the output 1 can be synced to the expression / cv input, giving more options, an extra CV output jack can feed a broadband or bandwidth in case you need more outputs.
Brainzilla v2, this is a custom pedal request, basically is the LFO section of the broadcast ,the rate / tap ratios multiplier now are linked to a step sequencer ( 3, 4 or 5 steps) instead of a single knob, now you can create a user programmable pattern with different rates/ratios. There are 5 knobs that selects the value of the rate or the multiplier (assigned to each step) and the other knob selects the waveform. Footswitches are reset (reset the sequencer steps back to 1), manual scroll (so every time you hit the footswitch the sequencer advances to the next step) and Tap (sets the rate of the lfo and if is in auto scroll mode, then it will scroll/advance to the next step automatically). CV output of the LFO and EXP/CV input in case you want to bypass the sequencer and plug an expression pedal and sweep manually or another CV source and control the rate/ratios with it. Toggles are amount of steps (3, 4 or 5), Scroll (manual scroll or auto scroll) and Tap/Rate (selects if the lfo rate is controlled via tap tempo or it will be a tuned to certain rate by the knob)